Service Manual
AT235
25
4.2 Selecting a transducer / how-to-guide
The following procedure is applicable for all transducer selections. Here, we have exemplified the procedure with
the transducer type DD45, the standard transducer for this instrument.
Please note that following this section, a list with the specific equipment requirements for each suitable
transducer type can be found as well as photos of the correct equipment setup. The procedure described below
is applicable for all the listed transducers.
Example:
Select Transducer Setup.
Select Headset phone as type DD45.
Fig. 41
To Next Page
Loading...
