Intergas Heating Ltd 3
9
Commisioning the appliance 29
9.1
Filling and venting the appliance and the installation .................................................................................................................... 29
9.2
Commissioning the appliance ....................................................................................................................................................... 31
9.3
Setting and adjusting the clock functions ...................................................................................................................................... 32
9.4
Additional functions ....................................................................................................................................................................... 32
9.5
Shutting down ................................................................................................................................................................................ 33
10
Setting and adjustment 34
10.1
Directly via the operating panel ..................................................................................................................................................... 34
10.2
Setting via the service code .......................................................................................................................................................... 35
10.3
Parameters .................................................................................................................................................................................... 35
10.4
Setting maximum CH power .......................................................................................................................................................... 36
10.5
Adjusting pump setting .................................................................................................................................................................. 36
10.6
Weather– compensation adjustment ............................................................................................................................................. 37
10.7
Checking gas-/air ratio .................................................................................................................................................................. 38
10.8
Setting gas/air adjustment procedure............................................................................................................................................ 39
Examples : .................................................................................................................................................................................................. 40
10.9
Conversion to different gas type.................................................................................................................................................... 40
11
Faults 41
11.1
Fault codes .................................................................................................................................................................................... 41
11.2
Other faults ................................................................................................................................................................................... 41
12
Maintenance 44
12.1
Disassembly .................................................................................................................................................................................. 44
12.2
Cleaning ........................................................................................................................................................................................ 44
12.3
Assembly ....................................................................................................................................................................................... 45
12.4
Combustion ................................................................................................................................................................................... 45
13
Electrical diagram 46
13.1
NTC resistances ............................................................................................................................................................................ 47
14
Short spares list 48
15
Warranty Conditions 49
16
CE Declaration 49
17
Gas Boiler System Commisioning Checklist 50
18
Service Record 51
© 2013 Intergas Heating Ltd. All rights reserved.
The information provided applies to the standard version of the product. Intergas Heating Ltd cannot therefore be held liable for any loss or damage arising from product
specifications deviating from the standard version. The available information has been compiled with all possible care, but Intergas Heating Ltd cannot be held liable for
any errors in the information or for the consequences thereof.
Intergas Heating Ltd cannot be held liable for any loss or damage arising from work performed by third parties.
Subject to change.