TruVision IP PTZ Camera FW 5.1 Configuration Manual 13
2. From the Time Zone drop-down menu (1), select the time zone that is the closest to
the camera’s location.
3. Under Time Sync (2), check one of the options for setting the time and date:
NTP: Check the NTP enable box and enter the server NTP address to synchronize
with an NTP server. The time interval can be set from 1 to 10080 minutes.
- Or -
Manual Time Sync.: Enable the Manual Time Sync function and then click to
set the system time from the pop-up calendar.
Note: You can also check the Sync with computer time checkbox to synchronize the
time of the camera with the time of your computer.
4. Check Enable DST (3) to enable the DST function, and set the date of the DST
period.
5. Click Save to save changes.
To Next Page
Loading...
