38 TruVision IP PTZ Camera FW 5.1 Configuration Manual
2. Under Exception Type, select one of the exception alarms from the drop-down list.
The options are: HDD Full, HDD error, Network Disconnected, IP Address
Conflicted, Invalid Login.
3. Check the checkbox to select the linkage method: Notify Alarm Recipient, Send
email, or Trigger Alarm Output. If “Trigger Alarm Output” is selected, check which
type is required: Select All, A->1, or A->2.
4. Repeat steps 2 and 3 for each of the exception type alarms to be configured.
5. Click Save to save changes.
Audio exception detection
Audio exception detection detects sounds that are above a defined threshold.
To set up audio exception detection:
1. From the menu toolbar, click Configuration > Events > Audio Exception
Detection.
To Next Page
Loading...
