TruVision IP PTZ Camera FW 5.1 Configuration Manual 25
Park actions
This is the action that will run automatically after the dwell time. A park action can be,
for example, a scan, preset, preset tour, or a shadow tour.
Note: The Scheduled Tasks function (see page 23) has priority over the Park Action
function. If these two functions are set at the same time, only Scheduled Tasks is
enabled.
To define a park action:
1. From the menu toolbar, click Configuration > PTZ > Park Action.
2. Enable Park Action (1).
3. Set the Dwell Time (2), which is the inactivity time of the dome before it starts the
park action.
4. Select an action from the Action Type drop-down list (3). You can choose from one
of the following:
Auto Scan
Frame Scan
Random Scan
Preset Tour
Shadow Tour
Preset
Panorama Scan
Tilt Scan
5. Click Save to save changes.
Privacy masks
Privacy masks let you conceal sensitive areas (such as neighboring windows) to protect
them from view on the monitor screen and in the recorded video. The masking appears
as a blank area on screen. You can create up to 24 privacy masks per camera.
Note: There may be a small difference in size of the privacy mask area depending on
whether local output or the web browser is used.
To add privacy mask area:
1. From the menu toolbar, click Configuration > PTZ > Privacy Mask.
To Next Page
Loading...
