Interlogix TruVision TVP-3104 - Operating PTZ Control; PTZ Control Panel; Using Presets

56 TruVision IP PTZ Camera FW 5.1 Configuration Manual
To search logs:
1. Click Log in the menu toolbar to display the Log window.
2. In the Major Type and Minor Type drop-down list, select the desired option.
3. Select start and end time of the log.
4. Click Search to start your search. The results appear in the left window.
Operating PTZ control
In live view you can use the PTZ control buttons to control pan/tilt/zoom and carry out
other functions of the camera.
PTZ control panel
In live view, click / to display/hide the PTZ control panel.
Figure 14: PTZ control panel
Table 8: Description of the PTZ control panel
No.
Description
1
. Directional buttons: Controls the movements and directions of the PTZ. Center button
is used to start auto-pan by the PTZ dome camera.
2
. Zoom, focus and iris: Adjusts zoom, focus and iris.
3
. PTZ movement: Adjusts the speed of PTZ movement.
4
. Turns on/off the light, it is supported by those have RS-485 port cameras.
5
. Turns on/off camera wiper.
6
. Auto focus
7
. Initializes the lens
Note: This feature can vary on different cameras.
Using presets
Presets are predefined locations of a PTZ dome camera that allow you to quickly move
the PTZ dome camera to a desired position.