TruVision IP PTZ Camera FW 5.1 Configuration Manual 51
Camera operation
This chapter describes how to use the camera once it is installed and configured.
Logging on and off
You can easily log out of the camera browser window by clicking the Logout button on
the menu toolbar. You will be asked each time to enter your user name and password
when logging in.
If you do not change the default admin password, the pop up window requesting that
you do so it will always pop up (see Figure 11 below).
Figure 11: Logon window
Live view mode
Once logged in, click “Live View” on the menu toolbar to access live view mode. See
Figure 1 on page 8 for the description of the interface.
Playing back recorded video
You can easily search and play back recorded video in the playback interface.
Note: You must configure NAS or insert SD card in the dome camera to be able to use
the playback functions.
To search recorded video stored on the camera’s storage device for playback, click
Playback on the menu toolbar. The Playback window displays. See Figure 12 on page
52.
To Next Page
Loading...
