Interlogix TruVision TVP-3104 - Telnet; Restore Default Settings

48 TruVision IP PTZ Camera FW 5.1 Configuration Manual
4. Click Add to add an IP address.
5. Click Modify or Delete to modify or delete the selected IP address.
6. Click Clear to delete all the IP addrsses.
7. Click Save to save changes.
Telnet
Note:
1. The Telnet user name is root as default and cannot be changed.
2. The default Telnet password is “ab12!”
3. The password should have least four characters with at least one letter and one
number.
To define Telnet:
1. From the menu toolbar, click Configuration > Security > Security Service.
2. Check the checkbox of Enable Telnet.
3. Enter the password and confirm it.
4. Click Save to save changes.
Restore default settings
Use the Default menu to restore default settings to the camera. There are two options
available:
 Restore: Restore all the parameters, except the IP parameters, to the default
settings.
 Default: Restore all the parameters to the default settings.
Note: Video standard cannot be restored to default settings no matter Restore or
Default.
To restore default settings:
1. In the Configuration folder, select the System tab.
2. Select the Maintenance tab.
3. Click either Restore or Default. A window showing user authentication appears.
4. Enter the admin password and click OK.
5. Click OK in the pop-up message box to confirm restoring operation.