TruVision IP PTZ Camera FW 5.1 Configuration Manual 31
Parameter Description
Fluorescent Lamp: Apply for scene where there are fluorescent lamps
installed near the camera.
Sodium Lamp: Apply for scene where there are incandescent lamps
near the camera.
Auto-Track: White balance is continuously being adjusted in real-time
according to the color temperature of the scene illumination.
Auto: White balance is determined automatically.
7.
Digital noise reduction (DNR) reduces noise, especially in low light
conditions, to improve image performance.
Options include: Normal Mode, Expert Mode, or OFF. Default is Normal.
Only available when DNR is set to Normal Mode. Set the level of noise
reduction in the Normal Mode. Higher value has a stronger noise
reduction. Default is 50.
Mode You can enable the defog function when the environment is foggy and
the image is misty. It enhances the subtle details so that the image
appears clearer. Default is Off.
Electrical Image Stabilizer (EIS) reduces the effects of vibration in a
video. Default is Off.
8.
It mirrors the image so you can see it inversed. Center, or OFF are
selectable.
50 Hz and 60 Hz are selectable. Select the standard according to the
different video
standards; normally 50 Hz for PAL standard and 60 Hz for
Set the desired frame rate to meet the different demands of field of view
and resolution. A higher frame rate may be required in a location with a
lot of movement (such as a money depot).
9.
Enable the option so that the lens operates the movements for
initialization. Default is Disabled.
Set the limit of the maximum value of zooming.
Select ON or OFF to enable or disable the BNC output. Default is ON.
Note: Not all models support all these parameter settings.
OSD
In addition to the camera name, the camera also displays the system date and time on
screen. You can also define how the text appears on screen.
To Next Page
Loading...
