TruVision IP PTZ Camera FW 5.1 Configuration Manual 49
Import/export a configuration file
To import/export configuration file:
1. In the Configuration folder, select the System tab.
2. Select the Maintenance tab.
3. Click Browse to select the local configuration file and then click Import to start
importing configuration file.
4. Click Export and set the saving path to save the configuration file.
Upgrade firmware
The camera firmware is stored in the flash memory. Use the upgrade function to write
the firmware file into the flash memory.
You need to upgrade firmware when it has become outdated. When you upgrade the
firmware, all existing settings are unchanged. Only the new features are added with
their default settings.
To upgrade the firmware through the web browser:
1. Download on to your computer the latest firmware from our web site at:
www.interlogix.com/video/product/truvision-ip-open-standards-outdoor-cameras/
- Or -
www.utcfssecurityproductspages.eu/videoupgrades/
2. In the Configuration folder, select the System tab.
3. Select the Maintenance tab.
In the Maintenance tab, select the Firmware or Firmware Directory option. Then
click the Browse button to locate latest firmware file on your computer.
Firmware Directory: Locate the upgrading folder of the firmware files. The
camera selects the corresponding firmware file automatically.
Firmware: Locate the firmware file manually for the camera.
4. Click the Browse button to locate the latest file on your computer.
5. Click Upgrade. You will receive a prompt asking you to reboot the camera.
Reboot camera
The camera can be easily rebooted remotely.
To reboot the camera through the web browser:
1. In the Configuration folder select the System tab.
2. Select the Maintenance tab.
3. Click the Reboot button to reboot the device.
To Next Page
Loading...
