TruVision IP PTZ Camera FW 5.1 Configuration Manual 27
2. Check the options that you want to clear:
Select All
Clear All Presets
Clear All Presets Tours
Clear All Shadow Tours
Clear All Privacy Masks
Clear All PTZ Limited
Clear All Scheduled Tasks
Clear All Park Actions
3. Click Save to save changes.
Intelligent tracking
Intelligent tracking is used to track a moving object or person in a selected region.
To define intelligent tracking:
1. From the menu toolbar, click Configuration > PTZ > Intelligent Tracking.
2. Enable Enable Intelligent Tracking (1).
3. Using the PTZ control buttons, point the camera at the desired area, or select a
predefined preset position, where you want to set intelligent tracking.
4. Set the duration time. This is the time during which the camera follows the moving
object or person. You can select up to 300 seconds.
5. Set the zoom ratio (2). This is the zoom level used when you start to track the
person or object.
To Next Page
Loading...
