Interlogix TruVision TVP-3104 - Page 59

TruVision IP PTZ Camera FW 5.1 Configuration Manual 57
You can only call up the predefined presets. For instance, preset 99 is the “Start auto
scan”. If you call the preset 99, the camera starts auto scan function.
These predefined presets cannot be modified. You cannot set up new presets.
Table 9: Predefined preset settings
Special
Preset
Function Special
Preset
Function
33
Auto flip 93 Set limit stops manually
34
Back to initial position 94 Remote reboot
35
Call preset tour 1 96 Stop a scan
36
Call preset tour 2 97 Start random scan
37
Call preset tour 3 98 Start frame scan
38
Call preset tour 4 99 Start auto scan
39
IR cut filter in 100 Start tilt scan
40
IR cut filter out 101 Start panorama scan
41
Call shadow tour 1 102 Call preset tour 5
42
Call shadow tour 2 103 Call preset tour 6
43
Call shadow tour 3 104 Call preset tour 7
44
Call shadow tour 4 105 Call preset tour 8
92
Start to set limit stops
To set a preset:
1. Select a preset number from the preset list.
2. Use the PTZ directional buttons to move the camera to the desired position.
3. Click to finish the setting of the current preset.
4. You can click to delete the preset.