Interlogix TruVision TVP-3104 - Page 26

24 TruVision IP PTZ Camera FW 5.1 Configuration Manual
2. Check the checkbox of Enable Scheduled Task (1).
3. Set the Dwell Time (2). You can set the dwell time in seconds (a period of inactivity)
before the camera starts the scheduled tasks.
4. Set the schedule and task details. Click Edit Tasks (3) to set the task schedule. The
Timing Tasks window appears:
Select All Day to set the schedule as all day, or Customize and input the start and
end times for each task. Click Enter on your keyboard to enter the time.
5. Choose the task type from the drop-down list. You can choose from one of the
following:
Close
Auto Scan
Frame Scan
Random Scan
Preset Tour
Shadow Tour
Preset
Panorama Scan
Tilt Scan
Dome Reboot
Dome Adjust
Aux Output
6. Click Save to save changes.