Interlogix TruVision TVP-3104 - Page 31

TruVision IP PTZ Camera FW 5.1 Configuration Manual 29
Click the Default button at the bottom of the screen to return all settings to factory
default values.
Figure 7: Camera image settings menu
Table 6: Image display parameters
Parameter Description
1.
Image Adjustment
Brightness
, Contrast
S
aturation, Sharpness
Modifies the different elements of picture quality by adjusting the
position of the values for each of parameter.
2.
Exposure Settings
Exposure Mode
The Exposure Mode can be set to Auto, Iris Priority, Shutter Priority,
and
Manual.
Auto: The iris, shutter and gain values will be adjusted automatically
according to the brightness of the environment.
Iris Priority: The value of iris needs to be adjusted manually. The
shutter and gain values will be adjusted automatically according to the
brightness of the environment.
Shutter Priority: The value of shutter needs to be adjusted manually.
The iris and gain values will be adjusted automatically according to the
brightness of the environment.
Manual: You can adjust the values of Gain, Shutter, and Iris manually.
Limit
Gain This feature is used to adjust the image gain. The value ranges from 0
to
100.
Slow Shutter
The shutter speed controls the length of time that the aperture is open to
let light into the camera through the lens. A slow shutter speed means it
is open for longer. Select On or Off.
Slow Shutter Level
If Slow Shutter is enabled, use this feature to adjust the shutter speed.
Default value is Slow Shutter*2.