TruVision IP PTZ Camera FW 5.1 Configuration Manual 43
2. Check Enable Timing Snapshot to enable continuous snapshots. Check the
Enable Event-triggered Snapshot to enable event-triggered snapshots.
3. Select the snapshot format (JPEG only), resolution and quality.
4. Set the time interval between two snapshots. The time interval can be in
milliseconds, seconds, minutes, hours, or days.
5. If Enable Event-Triggered Snapshot was selected, select the number of
snapshots to capture. For example, if you set the value as 4, the total number of the
snapshot will be multiples of four.
6. Click Save to save changes.
To Next Page
Loading...
