TruVision 11/31 Series IP Camera Configuration Manual 49
• Normal: This is continuous recording.
• Motion Detection: The video is recorded when the motion is detected.
• Alarm: The video is recorded when the alarm is triggered via the external
alarm input.
• Motion | Alarm: The video is recorded when the external alarm is
triggered or the motion is detected.
• Motion & Alarm: The video is recorded when motion and alarms are
triggered at the same time.
• Cross line: Video is recorded when the pre-defined line on-screen in
crossed.
• Intrusion Detection: Video is recorded when an intrusion is detected.
5. If you selected “Customize”, click the day of the week required and then for
period 1 set the start and end times during which you want the camera to
begin and end recording.
From the drop-down list box, select one of the record types to record.
Repeat for additional periods in the day. Up to four time periods can be
selected.
Note: The eight time periods cannot overlap.
6. Set the recording periods for the other days of the week if required.
Click Copy to copy the recording periods to another day of the week.
7. Click OK and Save to save changes.
Note: If you set the record type to “Motion detection”, “Alarm”, “Cross Line” or
“Intrusion detection” you must also define the arming schedule in order to trigger
the recording.
To Next Page
Loading...
