Intermec EasyCoder 3400e User Manual

EasyCoder 3400e Bar Code Label Printer User’s Manual
I-4
configuring the serial port, 1-15
connecting
printer to a mainframe, 1-14
printer to a network, 1-12
printer to a PC
using the parallel port, 1-12
using the serial port, 1-11
printer to an AS400, 1-13
printer to system
using the parallel port, 1-10
using the serial port, 1-10
control characters, full ASCII, D-5
conventions used in manual, xii
cover
cleaning, 3-7
removing, 1-6
D
darkness adjust control
setting, 5-5
using for optimal print quality, 5-5
Data Line Print, 6-5
entering, 6-5
using to test the operation of the printer, 6-5
using to troubleshoot printer, 6-5
data loss
checking for communication problems, 4-8
preventing, 4-7
Data Matrix, A-10
dimensions, A-3
DIP switch settings
changing, 1-15
configuration commands, 6-7
dot increments, moving, 6-8
Emulation mode, setting, 6-11
label rest point, adjusting, 6-10
table, serial port, 1-16
test and service, 6-4
dot increments, setting the number of, 6-9
downloading
definition, 2-16
drive roller, cleaning, 3-8
E
EAN, A-8
electrical requirements, A-3
Emulation mode
international character sets, B-4
setting, 6-11
environment, specifications, A-3
extended character sets, B-6
F
fanfold media, loading, 1-7
faults
media or system, 2-4
Feed/Pause button
functions of, 2-5
illustrated, 2-3
using, 2-5
flash SIMM, additional storage memory, 5-8
flow control, C-4
font tables, extended character sets, B-6
fonts and graphics, A-4
fonts, extended character sets, B-6
formats
positioning with DIP switches, 6-12
forms adjust
positioning the label format, 6-12
X forms, setting, 6-13
Y forms, setting, 6-14
front panel
LEDs, 2-4
understanding, 2-3
full ASCII table, D-3
G
graphics, A-4
H
hardware configuration test label
example, 1-9
printing, 1-9
host requirements, communications, C-7
I
IBM translation, character table, B-4
image bands
description, 5-9
function, 5-10
optimizing with print speed, 5-10
increasing printer throughput, 5-9
inspecting the printer, 3-3
installation
network, 1-13
printer, 1-5
interfaces
communications, C-7
RS-232, C-7
RS-422, C-8
RS-485, C-8
Interleaved 2 of 5, A-8
Intermec Standard protocol, C-3
international character sets, B-3
IPL commands, using to communicate, 2-16

Intermec EasyCoder 3400e Specifications

Cutting Specifications

rating for 0.005-inch paper	1, 000, 000 cuts
rating for 0.010-inch paper	500, 000 cuts
cutting method	Guillotine-type blade

Dimensions and Mounting

adds to printer length	0.5 inch
minimum media width	0.75 inch
maximum media width	4.5 inches

Media Specifications

maximum media thickness	0.010 inch
minimum liner weight	40 lb
minimum cut length	1.0 inch