Intermec EasyCoder 3400e User Manual

EasyCoder 3400e Bar Code Label Printer User’s Manual
I-6
printer (continued)
options, A-6
coax interface, A-6
twinax interface, A-6
plugging in, 1-5
RAM
allocation, 5-8
storage limitations, 5-8
understanding, 5-8
serial port, C-11
printhead
cleaning, 3-6
specifications, A-4
printhead specifications, A-4
printing
hardware configuration label, 1-9
increasing speed, 5-9
software configuration label, 2-13
speed, A-4
straight-through, 2-6
test label, 2-17
printing speed specifications, A-4
PrintSet, 2-16
problems
communication, 4-7
print quality, 4-5
printer operation, 4-3
protocols, C-3
Standard, C-3
user-defined, C-5
XON/XOFF, C-4, C-5
Protocols
Multi-Drop, C-5
Polling Mode D, C-5
R
RAM, using efficiently, 5-8
removing the printer cover, 1-6
requirements
electrical, A-3
hardware and software, C-7
resetting, memory, 6-6
ribbon specifications, A-4
RS-232 serial interface, C-7
RS-422 serial interface, C-8
RS-485 serial interface, C-8
S
safety summary, ix
schedule of maintenance, 3-4
self-strip printing
illustration of, 2-9
specifications, A-3
serial port
cables, 1-11
serial port (continued)
configuration, 1-15
description, C-11
settings, changing, 1-16
using to connect a PC to the 3400, 1-11
setting
dot increments, number of, 6-9
Emulation mode, 6-11
media sensitivity number, 2-12
software configuration label, printing, 2-13
specifications, A-3
speed, printing, A-4
Standard protocol, C-3
straight-through printing, 2-6
symbologies
2D, A-9
Codabar, A-8
Code 11, A-8
Code 128, A-8
Code 16K, A-9
Code 2 of 5, A-8
Code 39, A-8
Code 49, A-9
Code 93, A-8
Data Matrix, A-10
EAN, A-8
Interleaved 2 of 5, A-8
Maxicode, A-10
PDF417, A-9
POSTNET, A-8
UPC, A-9
T
tear bar, cleaning, 3-8
technical support
contacting Intermec Technologies Corporation, ii
terms and conventions, xii
Test and Service mode
86XX Emulation mode, 6-11
changing configuration commands from, 6-6
Data Line Print, 6-5
DIP switch settings, 6-4
entering, 6-3
exiting, 6-3
memory reset, 6-6
printing test labels, 6-5
using forms adjust, 6-12
X forms adjust, 6-13
Y forms adjust, 6-14
test label
example of hardware configuration, 1-9
printing, 2-17, 6-5
third-party software, 2-16
throughput, increasing, 5-9

Intermec EasyCoder 3400e Specifications

Cutting Specifications

rating for 0.005-inch paper	1, 000, 000 cuts
rating for 0.010-inch paper	500, 000 cuts
cutting method	Guillotine-type blade

Dimensions and Mounting

adds to printer length	0.5 inch
minimum media width	0.75 inch
maximum media width	4.5 inches

Media Specifications

maximum media thickness	0.010 inch
minimum liner weight	40 lb
minimum cut length	1.0 inch