Intermec EasyCoder 3400e User Manual

EasyCoder 3400e Bar Code Label Printer User’s Manual
1-18
Example of Using DOS to Verify Printer Communications
1. At the DOS prompt, type this command and press
Enter
:
MODE COM1 96,E,7,1,N
2. Type these command lines and press
Enter
:
COPY CON COM1
ABCDEF^Z
where:
COPY CON COM1 has the PC copy the following information to the COM1 port.
ABCDEF are random characters entered at the host.
^Z (
Ctrl
-
Z
)
Enter
sends the information to the printer.
The printer will print these characters:
3XXXU.021
Note:
If you are using a different platform to communicate with your printer, please
refer to your host computer user’s manual and the IPL Programming Reference Manual
for help downloading commands.

Intermec EasyCoder 3400e Specifications

Cutting Specifications

rating for 0.005-inch paper	1, 000, 000 cuts
rating for 0.010-inch paper	500, 000 cuts
cutting method	Guillotine-type blade

Dimensions and Mounting

adds to printer length	0.5 inch
minimum media width	0.75 inch
maximum media width	4.5 inches

Media Specifications

maximum media thickness	0.010 inch
minimum liner weight	40 lb
minimum cut length	1.0 inch