HelvC
NugFont
C39
Specifications
A-3
A
Printer Specifications
This section describes the specifications of the 3400e printer.
Electrical Requirements
Input Voltage 100, 120, or 230 VAC ± 10%
Frequency 47-63 Hz
Printing Method
The 3400e printer is capable of direct thermal (DT) printing or thermal transfer (TTR)
printing using thermal transfer ribbon.
Environment
Operating 10°C to 40°C (50°F to 104°F)
Humidity 10% to 90% noncondensing
Self-Strip (optional)
The self-strip rewinder hub can take up the backing of an entire 15,240-centimeter
(6,000-inch) roll of media.
Peel Release 10-50 grams
Note:
Self-strip printing is an option that you order with your printer.
Communications
Asynchronous RS-232C, RS-422, RS-485 interfaces
Serial ASCII code
Hardware (Ready/Busy) Flow Control
XON/XOFF Protocol
Intermec Standard Block Protocol
Polling Mode D Protocol
Multi-Drop Protocol
Baud Rates: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,00, 115,200
Specifications
Dimensions (no options installed)
Height 27.9 cm (11 inches)
Width 26.7 cm (10.5 inches)
Length 43.2 cm (17 inches)
Weight 15.8 kg (35 pounds)
To Next Page
Loading...
