Intermec easycoder f2 Installation & Operation

Intermec EasyCoder F4 – Installation & Operation IPL Version, Ed. 142
Chapter 6 Setting Up the Printer
Setup Parameters, cont.
Media, cont.
Contrast
Use the contrast parameter to make minor adjustments of the
blackness in the printout, for example to adapt the printer to variations
in quality between different batches of the same media quality. The
value can be setwithin the range -10 to 10% where -10 is the lightest
and 10 is the darkest. Default value is 0%.

Intermec easycoder f2 Specifications

General

Brand	Intermec
Model	easycoder f2
Category	Barcode Reader
Language	English