Intermec EasyCoder PX4i Service Manual

224 EasyCoder PX4i and PX6i Service Manual
Chapter 17 — Troubleshooting
17.9 No Communication (general)
Description:
The following actions are valid for all communication interfaces installed
in the printer.
Possible Causes and Suggested Remedies:
• Defective cable between printer and host.
- Check that the communication cable is correctly inserted and that it
is of the correct type and is correctly confi gured.
- Check that any clips or ground screws are properly engaged.
- Inspect cable for physical damage.
- Disconnect and connect the cable a few times to rub off possible
oxide from the connectors.
- Try using another identical cable.
• Defective cable between interface board and CPU board. This does not
apply to the serial port ("uart1:"), the USB port, or any EasyLAN board
which all are fi tted directly on the CPU board.
- Check that the cable is connected correctly.
- Inspect cable for physical damage.
- Disconnect and connect the cable a few times to rub off possible
oxide from the connectors.
- Replace the cable.
• Error in host.
- Try connecting the printer to another host computer.
• Erroneous data.
- If using Fingerprint, check if the data string contains the correct char-
acters using the Line Analyzer program included in Intermec Shell
(see the User’s Guide).

Intermec EasyCoder PX4i Specifications

General

Print technology	Direct thermal
Maximum resolution	300 x 300 DPI
Display	LCD
Product color	Silver
Keyboard layout	Numeric
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	120 mm
Maximum label length	2.7 m
Maximum roll diameter	213 mm
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	275 mm
Weight	12850 g