Intermec EasyCoder PX6i Installation Instructions

4 EasyLAN Wireless Interface Kit Installation Instructions
Chapter 1 — Introduction
Note: To maintain compliance with FCC Rules, the input/
output (I/O) cables that interconnect between the device and
any peripheral must be as specifi ed by Intermec.
Industry Canada Compliance
 is Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
 is device requires a radio license, unless it is used totally inside a build-
ing. ( e user must obtain this license.)
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
Cet appareil exige une license radio à moins d’être entièrement installé
dans un bâtiment. (L’utilisateur doit obtenir cette license.)

Intermec EasyCoder PX6i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	170 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	335 mm
Weight	14800 g