Chapter 1 — Use the IP30
2 IP30 Handheld RFID Reader User Guide
About the IP30
The IP30 allows you to connect via Bluetooth or USB. Together, the
IP30 and your mobile computer provide a high-performance mobile
RFID solution that allows you to bring the read/write device to the
tagged product rather than moving tagged products past a fixed
reader.
The IP30 supports the following mobile computers:
• CN3B and CN3F Mobile Computers. CN3 WAN configurations
are not supported with the IP30.
• CN4 Series Mobile Computer
• CK3 Series Mobile Computer
• CK61 and CK61ex Series Mobile Computers
• 70 Series Mobile Computers
The Bluetooth Version of the IP30 Attached to the CN3
To Next Page
Loading...
