Intermec IP30 - Attach the IP30 to the CK70 or CK71 Mobile Computers

Chapter 1 — Use the IP30
IP30 Handheld RFID Reader User Guide 9
Attach the IP30 to the CN3B or CN3F Mobile Computers
This section explains how to connect the IP30 to the CN3 using a
Bluetooth connection, a USB connection, or a USB connection
connected to the Model AR6 Common Access Card Reader.
1 Remove the CN3 handstrap and insert the handstrap into the IP30
handle.
2 Insert the CN3 into the IP30.
3 Lock the CN3 into place by lowering it into the IP30 locking
bracket.
4 If you are using the Bluetooth version of the IP30, go to
“Establish a Connection with the IP30” on page 25.