Chapter 1 — Use the IP30
IP30 Handheld RFID Reader User Guide 25
3 Lock the computer into place by angling the mounting plate into
the IP30 locking bracket.
4 Establish a Bluetooth connection. For help, see the next section
“Establish a Connection with the IP30.”
Establish a Connection with the IP30
Before you can use the IP30, you must establish a connection between
the IP30 and mobile computer using the Wireless Reader Wizard.
1 Make sure your Bluetooth radio is enabled on your mobile
computer. For help, see the mobile computer user’s manual.
2 For Windows Mobile 5.0, Windows Mobile 6.1, or Windows
Embedded Handheld 6.5 select Start > Settings > System and tap
the Wireless Readers icon. The Wireless Reader Wizard appears.
For Windows CE, select Start > Programs > Windows Explorer.
The Windows Explorer screen appears.
a Select Program Files > Intermec > Network. The Network
screen appears.
Note: To remove the mounting plate and CK70 or CK71, point the
reader away from you and carefully push down on the bottom of the
computer.
Note: The USB version of the IP30 establishes a connection with your
mobile computer when the IP30 USB adapter is plugged in. For help,
see “Attach or Remove the IP30” on page 8.
To Next Page
Loading...
