Chapter 1 — Use the IP30
6 IP30 Handheld RFID Reader User Guide
About the Ports
The USB version of the IP30 for the CK61 has two ports located on
the IP30 adapter. To access these ports, you must remove the port
cover.
On the bottom of the IP30 adapter, pull the port cover away from the
right side of the IP30.
Use the Battery
The IP30 uses the Model AB3 or Model AB19 batteries as a main
power source.
IP30 USB Adapter Port Descriptions
Port Description
Power Connect a power supply to the CK61 to power and charge the
CK61. The IP30 does not ship with a power supply. For more
information, contact your local Intermec sales representative.
Note: Connecting a power supply to the CK61 does not charge
the IP30. To charge the IP30 battery, see the next section.
COM 1 Connect other RS-232 devices, such as printers to the CK61.
Power
port
You must use the Model AB19 battery with the IP30NI.
To Next Page
Loading...
