Intermec IP30

Chapter 1 — Use the IP30
4 IP30 Handheld RFID Reader User Guide
For more information on how to upgrade your Windows operating
system and SmartSystems Platform Bundle (SSPB), see your mobile
computer user’s manual.
About the LEDs
Use the following table to understand the status LEDs on your IP30.
Microsoft Windows Operating System and SSPB Versions Needed
Mobile
Computer
Required Windows Operating System
Version
SmartSystems Platform
Bundle Version
CK3X Windows Embedded Handheld 6.5 version
1.44.16 or later
N/A
CK3 Windows Mobile 6.1 or later. SSPB version 6.20 or later.
CK61
• Windows Mobile 5.0 version 3.21 or later.
• Windows CE version 5.0 or later.
SSPB version 5.50 or later.
CN3B, CN3F
• Windows Mobile 5.0 version 3.21 or later.
• Windows Mobile 6.1 version 4.41.32 or
later.
• SSPB version 5.50 or later for
Windows Mobile 5.0.
• SSPB version 7.00.36 or later for
Windows Mobile 6.1.
CN4 Windows Mobile 6.1 version 4.41.32 or later. SSPB version 7.00.36 or later.
70 Series Windows Embedded Handheld 6.5 version
1.44.16 or later.
N/A
Note: If your 70 Series Mobile Computer has WEH 6.5 version 1.44.16
or earlier, you need to download the RFID support from the Intermec
website.
LED Icon Descriptions
LED Icon LED Name Description
Intermec Ready-to-
Work
™
indicator
Blue LED remains on when an the IP30
is connected to the mobile computer.
For more information, see the next
section.
Data Communications Flashes when there is data
communications between the reader
and the mobile computer.