Chapter 1 — Use the IP30
IP30 Handheld RFID Reader User Guide 11
2 Insert the CN4 into the IP30.
3 Lock the CN4 into place by lowering it into the IP30 locking
bracket.
4 If you are using the Bluetooth version of the IP30, go to
“Establish a Connection with the IP30” on page 25.
5 Connect the USB adapter or the Model AR6 Common Access Card
Reader to the IP30.
If you are using the USB version of the IP30, insert the IP30 USB
adapter into the docking connector until it snaps into place.
To Next Page
Loading...
