Chapter 2 — Installing the Forklift Power Supply
PB50 and PW50 Forklift Power Supply Installation Guide 25
• Battery swap is accommodated without removing the UPS
entirely.
• Metal area contact is reduced, but ventilation is good,
reducing the need for additional heat sink.
• No direct sunlight in this environment helps maintain lower
operating temperature.
A poorly planned installation presents several challenges,
including:
• Difficult access to power supply components, LED visibility
in operation is impossible.
• Damage could occur to lift or power supply components if
something fails.
• UPS battery removal is difficult due to location.
• The installation is tedious, time-consuming, and difficult to
work on.
• Troubleshooting problems will be as difficult.
• Enclosed environment will significantly reduce the air flow,
raising the temperatures of all the components.
To Next Page
Loading...
