Intermec PC23 - Print a Test Label from the Main Menu; How to Print on RFID Media

Chapter 2 — Set Up the Printer
66 PC23 and PC43 Desktop Printer User Manual
2 On the icon printer, press and hold until the test label starts to
print.
On the LCD printer, press and hold until the Media
Calibration Wizard appears. To print a label with the current print
settings, select and press .
Print a Test Label from the Main Menu
If you have an LCD printer, you can print a test label from the Main
Menu.
1 Make sure that the printer has media and ribbon (if necessary)
installed.
2 From the Ready screen, press .
3 Press to select Tools and then press . The Tools menu appears
with Test Labels selected.
4 Press .
5 Select Print Quality, Printer Information, or Printer Settings,
and then press . A list of available labels appears.
6 Select a label to print, and then press .
How to Print on RFID Media
If you have an LCD printer with the optional RFID module installed,
you can print on RFID media. Media containing RFID tags is slightly
thicker where the RFID tag is located. The slight thickness of this part
of the label may affect print quality. For thermal transfer labels,
Intermec recommends using high-quality ink ribbon.
Test Labels
Print Quality
Resources
Printer Information
Printer Settings