ZSim v5.XX User‘s Guide 17
formats, but they will not be loaded when the printer
starts up.
Default:
Off
Print Configuration Label
Purpose: Prints the current ZSim configuration settings on a
label.
Print Mode
Purpose: Determines the printer operating mode and sets the
label origin to suit the corresponding mode:
• Tear Off
• Peel Off
• Cutter
• Rewind
Default:
Tear Off
Redo Config
Purpose: Removes the configuration file, reboots the printer,
and enters the ZSim Initial Setup Configuration
Menu when the printer restarts.
Note:
You can only use the Redo Config command if
you have access to the Fingerprint Setup menu. You
will be prompted to enter the Fingerprint password
before you can access this command.
Reset Tuning
Purpose: Returns all Media Tuning parameters to their original
(default) values.
Save Current
Purpose: Saves the current ZSim configuration parameters for
future use.
Select Character Set
Purpose: Allows the user to block any ^CIa (change
international font) command from host.
Sample: If you enter 1257 (Windows Baltic Rim), the
corresponding character set will be valid whichever
international font is downloaded. Other character
sets can be found in the Fingerprint Font Reference
Manual. If you Clear the field, ZSim will parse the
To Next Page
Loading...
Need help?
General