2 ZSim v5.XX User‘s Guide
Memory card slot
ZSim CompactFlash card
Make sure you
insert the card
properly by
looking at the
arrows on the
card. Do not use
force to insert
the card.
4 Turn off the printer and remove the ZSim card when the screen
prompts you.
Configuring ZSim – PF, PM and PX Printers
e first time you turn on your printer after loading the ZSim program,
you will be prompted to go through a series of configuration screens to
optimize the printer settings. After setting your initial configuration, you
can access the ZSim Configuration menu at any time by pressing Setup
and entering the password (1138).
Navigating the ZSim Configuration Menu
While you are going through the ZSim Configuration menu, use the
following table to help you navigate. e menu tree consists of nodes and
entry points. e configuration menu tree is implemented in the printer
through lead texts and prompts which appear in the display. ere are
Nodes and Entry points.
A Node is defined by a text string terminated with a slash on the first
display row. is means you still have level(s) below with new nodes or
just an Entry point.
To Next Page
Loading...
Need help?
General