Intermec PF2i - Page 141

Appendix A — Specifications
PF2i and PF4i Mid-Range Printer User’s Manual 127
Print Speed and Resolution
Specification Description
Print Mode Direct Thermal
Thermal Transfer (option for PF2i)
Print Speed (variable) 100 to 200 mm/sec (4 to 8 in/sec)
Printhead Resolution 8 dots/mm at 203 dpi
Print Width (max)
PF2i
PF4i
56 mm (2.2 in)
104 mm (4.095 in)
Print Length (max) 409.5 cm (161.25 in)
Note: The maximum print length is
also restricted by the amount of free
SDRAM memory.
Media Width (min/max)
PF2i with standard edge guide
PF2i with quick-load guides
PF4i with standard edge guide
PF4i with quick-load guides
25 to 60 mm (1 to 2.36 in)
40 to 60 mm (1.57 to 2.36 in)
25 to 114.3 mm (1 to 4.5 in)
40/80 to 114.3 mm (1.57/3.15 to 4.5 in)
Media Roll Diameter (max) 213 mm (8.38 in)
Medial Roll Core Diameter 38 to 40 mm (1.5 in) or 76 mm (3 in)
Ribbon Width (min/max)
PF2i
PF4i
25 to 60 mm (1 to 2.36 in)
55 to 110 mm (2.17 to 4.33 in)
Ribbon Roll Diameter (outer, max) 64 mm (2.56 in)
240 to 300 m (787 to 985 ft) of ribbon,
depending on ribbon thickness
Ribbon Roll Core Diameter (inner) 25.4 mm (1.00 in)
Print Directions 4