Interquartz Handset - Handset Volume Settings; Ring Cadence Patterns

Version 0.4 Page | 12
Handset volume
Volumes for each tone are shown below.
Tone Type Level Comment
Ring Melody It depends on Ringer Volume Setting.
Alert Tone It depends on Alert Volume Setting.
Key Sound Constant Can be enabled or disabled by the user.
(Options are Silent, Click, Tone)
Confirmation Sound Constant Can be enabled or disabled by the user.
Coverage Warning Constant Used to warning for out of RF link range.
Can be enabled or disabled by the user.
Charger Warning Constant Used to warning for battery low. Can be
enabled or disabled by the user.
Ring cadence
Cadence 1:
2s
4s
2s
4s
2s
4s
2s
4
2s
Cadence 2:
2s
4s
2s
4s
2s
4s
2s
4
2s
Note:
When ringer volume is Off (Vibrate), Handset vibrates according to this timing (Xs on / Xs off) in all the
cadences.
On
Off
On
Off