Version 0.4 Page | 27
Status
This provides the present condition of the handset and the base station it is location registered to.
Some of the information available in this mode is described in the table below (this information is
updated during location request update from the DECT system).
Parameter Description
SW Version Base station: Current firmware installed on the current Base station the Handset is
location registered to.
Handset: firmware presently installed in the handset.
Nomenclature: Version Date Stamp (for e.g.: 00.21 01-07-2010 00:00).
HW Version Current hardware module used in base station and handset.
DECT Band Operating frequency of system. DECT band includes US, EU, LTAM, SA, N/A options.
IP Address IP address of base station.
MAC Address HW address of base station.
System Name Name describing the SME network. Usually a string of 16 bytes.
Battery Level Current handset battery energy position (in %).
IPEI: HW address of the handset - see description below.
IPEI
The IPEI (International Portable Equipment Identity) is a unique identification of portable part
(handset) and DECT Repeater. The IPEI is formatted and displayed in HEX, OCT, and OCT
nomenclatures.
To Next Page
Loading...
