11
Getting Started Interwrite
TM
Board
1 Attach the Wall Mounting Bracket to the wall (Figure 1), using
hardware appropriate for the wall structure. (This hardware is not
included.)
2 Hang the Interwrite Board by interlocking the Wall Mounting
Bracket with the rear edge of the top part of the Interwrite Board
frame, shown in Figure 2.
Two people should mount the Interwrite Board on the
wall to avoid injury, or damage to the Interwrite Board.
If you are planning to use the Mounting Clips, described on page
42, in conjunction with the wall mount, install them on the back
of the board and attach them to the wall
after
you hang the
Interwrite Board.