(133PO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/17/2020
133
PO
SAVE THESE INSTRUCTIONS
English
Page 4
PARTS REFERENCE
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
When ordering parts, be sure to quote the model number and part numbers.
REF. NO. DESCRIPTION QTY. SPARE PART NO.
1 CONTROL STATION 1 12943
2 CONNECTOR HOSE 1 11873
3 HOSE CLAMP 2 11489
4 CELL HOUSING O-RING 2 12947
5 CELL HOUSING 1 12945
6 TITANIUM ELECTRODE O-RING 1 11585
7 TITANIUM ELECTRODE 1 12946
8 ELECTROLYTIC CELL NUT 1 11582
9 TEST STRIPS 1 19635
PRODUCT SPECIFICATIONS
5
3
1
6
8
7
2
4
9
Inlet (Connector Hose
to Filter Pump)
Outlet (Hose Returning
Water to Pool)
Model: CS3110
Power: 110 - 120 Volt AC
Amperage: 0.5 A
Wattage: 30 W
Ideal Salt Level: 3000 ppm (parts per million)
Maximum Chlorine Output/hour: 4 grams/hour
Filter pump minimum and
maximum flow rate:
300 gallons/hour (1136 liters/hour) /
1000 gallons/hour (3785 liters/hour)
Limited Warranty: see “Limited Warranty”
For pools and filter pumps with 1-¼” (32mm) hose connection fittings.
To Next Page
Need help?
General
