Intex ECO 20110 - LED Code Chart

261
PO
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
SAVE THESE INSTRUCTIONS
Page 19
LED CODE CHART
LED Reading Definitions
FP FilterPumpWorkingMode
80 BoostMode
 00 Stand-ByMode(Start-up)
 01 MinimumOperatingHour(1hourremaining)
 02 OperatingHours(2hoursremaining)
 03 OperatingHours(3hoursremaining)
 04 OperatingHours(4hoursremaining)
 05 OperatingHours(5hoursremaining)
 06 OperatingHours(6hoursremaining)
 07 OperatingHours(7hoursremaining)
 08 OperatingHours(8hoursremaining)
 09 OperatingHours(9hoursremaining)
 10 OperatingHours(10hoursremaining)
 11 OperatingHours(11hoursremaining)
 12 MaximumOperatingHours(12hoursremaining)
 90 AlarmCode(LowPumpFlow/NoFlow)
91 Alarm Code (Low Salt Level)
 92 AlarmCode(HighSaltLevel)
 93 Stand-ByMode(OperatingProcessfinished)
 “BLANK” NoPoweror“PowerSavingMode”waitingtostartnext
Saltwater System cycle.