To Next PageTo Next PageWhat to do if my Intex Water Pump filter motor fails to start?
First, ensure the filter cord is plugged into a 3-wire outlet protected by a Class A Ground Fault Circuit Interrupter, or RCD. Then, check the fuse box and reset the circuit breaker. If it trips repeatedly, there may be an electrical system defect, so turn off the breaker and call an electrician. Finally, the motor may be too hot; allow it to cool down.
Why is my Intex Krystal Clear 51 filter not pumping water or the flow is very slow?
Check for obstructions in the intake or discharge hose inside the pool wall. Tighten hose nuts and inspect hoses for damage. Also, verify the pool water level. Replace the cartridge if there's scale or buildup, and clean the cartridge more often if the pool is excessively dirty. Clean inside the plunger valve and ensure the valve handle is in the full upright position.
What to do if my Intex Krystal Clear 51 Water Pump doesn't work?
Ensure the pool is filled to the correct water level. Clean the strainer screens at the pool inlet. Tighten the hose nuts and check the hose for any damage. Check for and clear any obstructions like sticks or leaves in the pump intake. Turn and pull the valve handle to the full upright position to release any air lock inside the cartridge chamber.
What to do if the LED panel code flashes and alarm is on for the Intex Water Pump?
Ensure the plunger valves are opened, and the filter cartridge and cell are free from debris and dirt. Also, make sure all trapped air is released from the circulation line. Check that the water inlet and outlet hoses are correctly directed, reversing them if necessary. Ensure the flow sensor, especially the hinge, is clean and that the flow sensor cord is securely connected.
Why is my Intex Krystal Clear 51 filter not cleaning the pool?
Adjust the sanitizer and pH levels, consulting your local swimming pool supply store if needed. Clean or replace the filter cartridge, checking for any holes and replacing it if damaged. Operate the filter for longer periods if the pool is excessively dirty. Clean the strainer screen at the pool wall inlet to ensure it's not restricting flow.
Why is the top cover of my Intex Krystal Clear 51 Water Pump leaking?
Remove the cover and check for the O-ring; replace it if missing. Manually tighten the cover to ensure it is secure. Replace or clean the filter cartridge, as a dirty cartridge can sometimes cause leaks.
How to fix air lock in Intex Krystal Clear 51 Water Pump?
Open the air release valves, then lift and lower the inlet hose until water flows out of the air release valves. After that, close the air release valves. Ensure the lower position of the pool outlet connects to the filter pump water inlet, and the upper position of the pool inlet connects to the filter pump water outlet.
How to fix a leaking hose on my Intex Krystal Clear 51 Water Pump?
Tighten or reinstall the hose nut.
Why are there white flakes in the water with my Intex Water Pump?
Drain about 20 to 25% of the pool water and add fresh water to decrease the calcium hardness. Visually inspect the electrolytic cell for scale build-up and clean the electrolytic cell if necessary.
General| Brand | Intex |
|---|---|
| Model | Krystal Clear 51 |
| Category | Water Pump |
| Language | English |
Focuses on preventing electric shock through proper connection and handling of the electrical components.
Highlights critical warnings regarding fire/explosion risk and electrical shock hazards.
Detailed steps for installing the strainer and plunger valve for pool connections.
Specific instructions for setting up the strainer and plunger valve for larger above-ground pools.
Guide to correctly install the pool nozzle and plunger valve assembly for optimal circulation.
Steps for connecting the main system unit and hoses to the pool's water lines.
Crucial steps to ensure no air is trapped in the system when filling with water.
How to safely operate the filter pump, including initial setup and air bleeding.
Procedure to unlock controls, set operating hours, and initiate sanitizer production.
Identifies alarm codes (90, 91, 92) and their common causes for system malfunctions.
Provides specific solutions for resolving circulation, salt level, and cell failure alarms.
Detailed instructions for cleaning or replacing the filter cartridge and associated components.
Detailed remedies for LED codes 90, 91, and 92, covering circulation, salt levels, and cell performance.
A critical safety warning sign to be posted near the pool regarding diving hazards.
