Intex PureSpa SJB-HS-20-1C Owner's Manual

299
A
S AVE THESE INSTRUCTIONS
(299IO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2018
English
Page 12
SET UP (continued)
Thespatubination/deationvalveincorporatesan“airpressurerelease”functionthatautomatically
releases excess air when the spa tub internal pressure is between 1.5 - 2.5 psi (0.103 - 0.172 bar).
Air pressure release valve.
Colder temperatures at night
cause the spa to seem less
inated.
NOTE:
If there is a need to replace the spa tub air pressure
release valve core
(5)
due to wear and tear, use the included
wrench
(22)
to unscrew the core from the valve base.
Replace a new air pressure release valve core back. Make
sure the core is securely tightened
(see drawing 8)
.
Air expands in the midday
heat and correct air
pressure is restored.
Air expands in the midday heat.
Air pressure release valve kicks
in and releases excess air.
Inationofspainthemorning.
IMPORTANT
8
22
5

Intex PureSpa SJB-HS-20-1C Specifications

General

Brand	Intex
Model	PureSpa SJB-HS-20-1C
Category	Swimming Pool
Language	English