Invacare Comet - Replacing Lifter;Lifter Electronic

SERVICE MANUAL
Invacare
®
- Comet
38
7.9 Replacing lifter/lifter electronic
ATTENTION! Risk of accident.
Accidental rolling can lead to accidents.
• Secure the scooter against rolling away.
NOTE:
When disassembling, note the position of small parts such as screws and washers. Put small
parts down so that they can be reassembled in the right sequence.
Requirements:
• Open spanner, 14 mm.
• Phillips screwdriver
• Secure the scooter against rolling away.
• Remove the seat.
• Remove motor cover.
• Disconnect both battery plugs (1).
Replacing lifter:
• Remove batteries.
• Disconnect lifter cable at wiring harness
connecting plug in motor enclosure.
• Remove screws (1) on lifter (2).
• Replace lifter.
Replacing lifter electronic:
• Remove both screws (1) from the lifter
electronic (2).
• Replace lifter electronic (2).