Invacare Comet - Postural Belt Fitting and Use

Invacare
®
- Comet
SERVICE MANUAL
53
7.16 Replacing the front direction indicators
Requirements:
• Phillips screwdriver.
• Remove the seat.
• Remove motor cover.
• Separate battery cable.
3-wheel version
• Remove direction indicator screw (1).
• Disconnect direction indicator cable (2) from
wiring harness.
• Replace direction indicator.
• Reassembly of the direction indicators takes
place in reverse order
• Check functions.
4-wheel version
• Remove direction indicator screw (1) on
housing.
• Disconnect direction indicator cable (2) from
wiring harness.
• Remove screws (3) on indicator glass.
• Remove indicator glass.
• Loosen screws (4) on orange-coloured cap
(5) and remove cap.
• Replace lightbulb.
• Reassembly of the direction indicators takes
place in reverse order
• Check functions.