Invacare Comet - Driving the Scooter

SERVICE MANUAL
Invacare
®
- Comet
34
7.7 Replacing brakes
ATTENTION! Risk of accident.
Accidental rolling can lead to accidents.
• Secure the scooter against rolling away.
NOTE:
When disassembling, note the position of small parts such as screws and washers. Put small
parts down so that they can be reassembled in the right sequence.
NOTE:
The front axle can only be replaced on the 3-wheel version. The 4-wheel version does not have a
replaceable axle.
Requirements:
• Open spanner, 12 mm.
• Open spanner, 13 mm.
• Philips screwdriver
• Allen key 5 mm
• Supporting wooden block
• Remove the seat.
• Remove motor cover.
• Separate battery cable.
• Place a supporting wooden block under the
front part of the frame so that the front wheel
is no longer touching the floor.