25
Getting into the wheelchair:
• Position your wheelchair as close as possible to your seat. This might
have to be done by an attendant.
• Switch your wheelchair off.
• Apply the manual wheel lock of your wheelchair (if existing).
• Detach the side part of your wheelchair or swivel it up.
• Now slide into the wheelchair.
Getting out of the wheelchair:
• Drive your wheelchair as close as possible to your seat.
• Switch your wheelchair off.
• Apply the manual wheel lock of your wheelchair (if existing).
• Detach the side part of your wheelchair or swivel it up.
• Now slide onto your new seat.
NOTE:
If you do not have sufficient muscle strength, you should ask other persons for help. Use a
sliding board, if possible.
To Next Page
Loading...
