Invacare Topan - Adjusting Legrests (Length and Angle)

57
8.5 Legrests
8.5.1 Modifying the seat depth in the front by adjusting the position of the legrest
support brackets
The seat depth in the front can be modified by adjusting the position of the legrest support
brackets. Adjusting the position of the legrest support brackets is the same for all types of legrests.
Pre-requisites:
• 1x Allen key 4 mm
• Loosen the grub screw (1), using the Allen
key.
• Release the wing screw (2).
• Set the position of the legrest support bracket
to the desired depth.
• Re-tighten the screws.