98
12.2.2 How the user is secured within the wheelchair
CAUTION: there is a danger of injury if the user is not properly secured within the
wheelchair!
• Even if the wheelchair is fitted with a posture belt, this is no substitute for a proper safety belt
which complies with ISO 10542 in the transport vehicle! Always use the safety belt installed in
the transport vehicle !
• Safety belts must be in contact with the user's body! They must not be held at a distance from
the user's body using parts of the wheelchair such as armrests or wheels!
• Safety belts must be pulled as tightly as possible without causing the user discomfort!
• Safety belts must not be positioned while twisted!
• Ensure that the third seatbelt anchorage point is not fixed directly to the vehicle floor, but to
one of the vehicle uprights!
To Next Page
Loading...
