95
12.2 Use of the wheelchair as a seat in a vehicle
Please note
In order to use a wheelchair as a motor vehicle seat, it needs to be equipped with attachment
points to enable anchoring in the motor vehicle. These accessories may be included in the
standard scope of wheelchair order and delivery in some countries (UK for example), but may
also be obtained from Invacare® as an option in other countries.
This electric wheelchair complies with the requirements of ISO 7176-19:2001 and may be used as
a vehicle seat in connection with an anchoring system that has been checked and approved in
accordance with ISO 10542. The wheelchair has undergone a crash test in which it was anchored
in the transporting vehicle's direction of travel. Other configurations were not tested. The crash test
dummy was secured using pelvic and upper body safety belts. Both types of safety belt should be
used in order to minimise the risk of injuries to head or upper body. It is imperative that the
wheelchair is inspected by an authorised dealer before being used again after being involved in a
crash. Alterations to the wheelchair anchoring points may not be carried out without the
manufacturer's permission.
To Next Page
Loading...
