96
Caution: There is a danger of injury if the wheelchair is not properly secured during use
as a vehicle seat!
• If possible, the user should always leave the wheelchair to use a vehicle seat and the safety
belts provided with the vehicle!
• The wheelchair should always be anchored facing in the transport vehicle's direction of travel!
• The wheelchair must always be secured in accordance with the wheelchair and anchoring
system manufacturers’ operating manual!
• Always remove and secure any accessory parts fixed to the wheelchair such as chin controls
or tables!
• If your wheelchair is equipped with an angle adjustable backrest, then it must be placed in an
upright position!
• Fully lower elevating legrests, if fitted!
• A seat lifter must be fully lowered, if fitted!
To Next Page
Loading...
