Invacare Topan - Repairing a Flat Tyre at the Back (Tyre Type 3.00-8)

90
11.1.1 Repairing a flat tyre at the back (tyre type 3.00-8")
Injury hazard! If the wheel has been insufficiently secured during assembly, it can
become loosened during driving!
• When refitting the drive wheels, tighten the Torx screw that secures the wheel to the hub to a
torque of 30 Nm!
• Secure all screws using a suitable threadlock (e.g. Loctite 243)!
Requirements:
• Torque wrench with ...
• Allen bit 5 mm
• Torx bit T40
• Repair kit for tyre repair or a new inner tube.
• Talcum powder
• Threadlock Loctite (e.g. Loctite 243)